 |
| How to produce toilet wash chemical like Harpic. |
Toilet wash is made with some harmful chemical with Choky smell. That is why it is necessary to take some precautions so as not to get hurt when preparing it.
Precautions
1.Do not have direct contact with these chemicals on skin.
2. Use a nose mask to avoid inhaling the chemicals
3. Do not bring the chemicals near flame.
RECIPES : To produce 15 litres of Toilet Wash.
1. Nitrosol 130g
2.Caustic Soda 250g
3.Soda ash. 350g
4. Sulphonic. 1/2 litre
5. Hydrochloric Acid 1/2 litre.
6. Colour. 100g
7. Perfume 30mil.
PROCEDURE
1. Measure 12 litres of water in a big bowl or bucket.
2.Dissolve Nitrosol in the water completely to avoid lumps.
3.Dissolve caustic soda in a separate bowl with water and pour into the Nitrosol. Then stir to mix it up properly.
4.Dissolve Soda ash in a separate bowl with water and add to the big bowl containing Nitrosol and caustic soda.
5.Pour in the sulphonic into the big bowl and stir to mix up very well.
6. Now it is time to add the highly concentrated acid. You have to be careful and cover your nose because of its Choky smell. Pour the acid gently into the big bowl without splashing. Allow it to run down through the wall of the bucket. Then rinse the acid container with lots if water and dispose. Then stir the mixture properly to mix up with other recipes.
7. To add colour, dissolve it in a separate bowl with little water and add to the big bowl. Then stir to mix up properly.
8. Pour in the perfume and stir properly.
Then set the solution to stand for 24hrs before packaging.
Subscribe by Email
Follow Updates Articles from This Blog via Email
No Comments